Description

This is AVR programmer, designed as a arduino shield. In this way, you can program most of the AVR ICs with arduino IDE and using arduino board as ISP.

The AVR Programmer Shield allows you to program ATtiny and ATmega microcontrollers using your Arduino. Instead of pulling out the breadboard and wiring everything up every time you want to (re)program a microcontroller, you can just use this shield! It features a ZIF socket so inserting / removing the microcontrollers is a breeze. It also requires no additional software; everything is done through the Arduino IDE or avrdude.

Support to use alone via other programmer like USBASP, or use as arduino shield

Supported Chips List:

It supports most of the AVR ICs, and all the similar AVR packages:

  • Swtich Left Group-1:
    • Attiny 11 / 12 / 13/ 15 / 45 / 85 (8p)
    • Attiny *313 (20P)
  • Switch Middle Group-2:
    • Attiny 24 / 44 / 84 (14p)
  • Switch Right Group-3:
    • ATmega 8 / 48 / 88 / 168 / 328P (28P)

Features:

  • LED indicators: Heartbeat, Programming, and Error, designed as ArduinoISP sketch
  • Auto-reset jumper: on for programming arduino source board and off for programming target board
  • Stackable female headers included
  • Test LED on board, connect to IC pin3.
  • Replaceable 16MHz crystal for programming ATmega MCU
  • Wide size ZIF socket: simple to insert and remove microcontrollers for programming, you can do mass programming easily! One socket for programming all different microcontrollers!

Documentation: See the instruction, video tutorial, and more on this page.

Current version is green board R2.

Additional information

Weight 0.05 kg

4 reviews for AVR ISP ICSP Programmer Arduino Shield R2

  1. 5 out of 5

    nfriedly (verified owner)

    Works marvelously!

    It has the extra pins that were added to Uno R3, so if you have an older revision (such as https://www.electrodragon.com/product/arduino-compatible-pth-kit/ ), you’ll have to bend a couple of pins in to make it fit. But the extra pins aren’t connected to anything, and the pins are long enough that everything still gets a good connection.

  2. 5 out of 5

    thiagoas (verified owner)

    Great product! Very nice to copy some atmega328.

  3. 1 out of 5

    Mark Phelps (verified owner)

    This is worthless … They used wide Body center product so the Attiny series IC’s will not fit into the socket !!!The Picture advertised shows a narrow inline socket that will work with the Attiny series Micros ….. I can’t use them !!!!!

  4. 3 out of 5

    Chao (store manager)

    Thanks for the feedback, the current batch indeed have this problem, we will fix this and contact you for replacement. Thanks!

Add a review

Your email address will not be published. Required fields are marked *