ESP-01M Wifi Module, ESP8285, 1MB, Vertical Design

Description

• Based on ESP8285, internal 1MB flash, mini module size
• Vertical design, could be better RF performance, specially when internal volume is limited for design.
• DIP-18 Pin, your main board can make a groove, and soldering pins on side. Reference image here.
• Board size 18*18*2.8mm
• On Board PCB antenna, gain 2DBi
• Baudrate support 300 ~ 4608000 bps, default 115200 bps
• Average / peak power usage: 71mA / 300mA, modern/light/deep sleep mode – 20 / 2 / 0.2 mA
• Packaging – ESD bag.

ESP8285 Features:

• Frequency up to 160MHz, esp8266 80Mhz
• 2414-2484 Mhz
• Power: 802.11 b/g/n – 11Mbz / 54Mbs / HT20, MCS7
• 11 IOs
• Built-in 10 bit high precision ADC
• Support UART / GPIO / IIC / PWM / ADC interface
• Integrated Wi-Fi MAC / BB / RF / PA / LNA
• Supports multiple sleep modes with standby power consumption as low as 1.0 mW
• Built-in Lwip protocol stack
• Support STA / AP / STA + AP work mode
• Support Smart Config / AirKiss a key distribution network
• Serial port rate up to 4Mbps
• General AT commands can be used quickly, you can brush the Web configuration firmware
• Support serial port local upgrade and remote firmware upgrade (FOTA)

ESP-01M Pin definition, dimension see on this page.

ESP8266 Module Series please see on this page. 

Additional information