Stainless Steel Metal Pin for Desoldering
$2.00
- Description
- Additional information
- Reviews (3)
- Enquiry2
Description
Stainless materials
Let the hollow pins go through and infix with the components pins, heat up and then turn it a little bit then the components can remove.
- 0.8mm
- 1.0mm
- 1.2mm
- 1.4mm
- 1.6mm
- 1.8mm
- 2.0mm
Additional information
| Weight | 0.06 kg |
|---|
trhardin (verified owner) –
Everyone should have one of these (unless you are one of those people who never make mistakes..) when you have to remove a component the solder wick get most of the solder, buit invarably with plated through holes there is solder trapped in te hole whick makes putting the new component in difficult. with these just heat the pad, push the pin though and you are ready to go. the pins appear to be stainless and most are hollow so the solder set up outside the hole and dose not stick to the pin used to push it out.
Aiden (verified owner) –
Pins are good, however the case was not and the handles fail to stay snapped in place.
Jacques (verified owner) –
I do not really see the use of these pins. I prefer to use a drill.